The Grinding Software Developed By Demina Can Be Used To Set The Grinding Parameter
Palvelu
Ota meihin yhteyttä
Yrityksen nimi: BEIJING DEMINA PRECISION MACHINERY CO., LTD
Puh 0086-10-62965622 0086-13910819265
Sähköposti:[email protected]
Osoite: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

The Grinding Software Developed By Demina Can Be Used To Set The Grinding Parameter


2023-05-19


Grinding application software

The grinding software developed by Demina can be used to set the grinding parameters such as tool Angle, arc size and feed speed. By setting the basic parameters through the grinding software, the machine tool can automatically grind the high-precision tool after the tool center is adjusted. All the parameters of the machine tool are managed by the database system, through the processing program name, convenient for the storage and search of the program. The software can display the tool image and the coordinates of the NC axis.

At the same time, this software is responsible for the communication between the interface and the numerical control system, which can generate the numerical control code (G code) by integrating the grinding wheel parameters, tool parameters and processing parameters (such as feed quantity, feed speed and residence time, etc.) of the software interface into the numerical control system, so that the machine tool can finish grinding automatically. The software has four cycles of middle edge grinding, right edge grinding, left edge grinding and all grinding. And can respond to all customer requirements, and minimize the grinding of air time.

BT-150D diamond tool grinder tool grinding application software package is divided into single edge tool package and single arc tool package.

The single-edge tool package is used for typical diamond tool grinding. It can be used to grind the tip consisting of two straight edges and a transition arc. When grinding each straight edge, the swing position, swing frequency and swing amplitude of the grinding wheel can be set arbitrarily in the program. Feed speed, feed amount and dwell time can be selected according to the grinding wheel's durability and condition. The safety distance of each edge can be set to reduce the time of empty grinding. These parameters can be continuously optimized and stored in the database for future use.

The single arc tool package is used for a single convex arc edge and a number of straight edge components of the tool, including hub tools, forming tools. The number of cutting edges can be arbitrarily added without restriction. The grinding sequence can be arranged arbitrarily, the process data can be edited, and these parameters can be continuously optimized and stored in the database for future use.

 
Lisätietoja tuotteistamme Lue lisää